Wired Networking

Four-port GPON optical line terminal (OLT) designed to manage fiber internet service for up to 512 clients (128 per port)

The Cloud Core Router 2216! Its powerful 16-core CPU can trade blows with the mighty 72-core Tile CPU of our previous flagship - the CCR1072

• But the exceptional Marvell Prestera Aldrin2 switch-chip really takes it to the next level with L3 Hardware Offloading! Our previous CCR2116 featured a switch-chip with four 10G CPU connection lines, but this time there are four 25G lines
• There are 2x QSFP28 cages for blazing-fast 100 Gigabit connectivity, 12x SFP28 cages for 25 Gigabit networking, and a Gigabit Ethernet port
• The device comes with 16 GB of RAM
• decent NAND storage
• two M.2 SATA slots for additional storage
• four hot-swappable fans
• dual-redundant hot-swap power supplies

• 48 Gigabit RJ45 Ports
• 2 SFP+ Ports
• 2 SFP Ports
• 1 Serial Console Port
• Non-Blocking Throughput: 70 Gbps
• Supports POE+ IEEE 802,3at/af and 24V Passive PoE

An outdoor reverse PoE switch with Gigabit Ethernet and 10G SFP+ ports

• 7 REVERSE POE GIGABIT ETHERNET PORTS
• DURABLE OUTDOOR ENCLOSURE
• DC JACK & 2-PIN TERMINAL FOR ALTERNATIVE POWERING
• CAN BE POWERED BY A BATTERY

small SOHO switch

• Two models are available, the RB260GS, and the RB260GSP
• Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit
• Both devices have five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip
• The devices are running an operating system designed specifically for MikroTik Switch products

The modern quad-core CPU running at 864 MHz combined with a solid GB of RAM packs a hefty punch when it comes to heavy operations like complex firewall rules, IPsec hardware encryption, using more threads or experimenting with the most advanced RouterOS features. And with the addition of WPA3 advanced encryption support, you’re safer than ever before

• 1x K-47 wall mount set
• H.265, H.264, MJPEG
• 1x 24V 1.2A power supply (straight plug)
• 1x hAP case base

1U rackmount


• 1x Gigabit Ethernet
• 8xSFP+ cages
• LCD
• 72 cores x 1GHz CPU
• 16GB RAM
• up to 120 million packets per second
• 80Gbps throughput
• RouterOS L6

• The Connectivity Router - your best companion when it comes to SFP
• SFP+ and SFP28 management! 1
• 10 and 25 Gbps ports in a single device to make your life easier

router features the mighty Amazon Annapurna Labs Alpine CPU

• 16 cores running at 2 GHz
• supports Layer 3 Hardware Offloading
• four 10G SFP+ ports

MikroTik’s RB-CCR2004P is a carrier-grade cloud core router powered by a 4 core ARM CPU. The unit comes equipped with installed RouterOS L6 and 4GB of onboard RAM. It features 16x Gigabit Ethernet ports as well as 2x SFP+ uplink ports and dual power supplies for integrated redundancy. Each group of 8 Gigabit Ethernet ports is connected to a separate Marvell Amethyst family switch chip. Each switch chip has a 10Gbps full-duplex line connected to the CPU. Each SFP+ cage also has a separate 10Gbps full-duplex line

16× Gigabit Ethernet ports, CPU-connected

• 2× 10G SFP+ fibre uplink ports
• Passively cooled design for silent operation
• Dual redundant hot-swappable power supplies
• Metal desktop chassis
• RouterOS Level 6 with advanced routing, firewall, VPN, MPLS, and traffic shaping support

• Five-port desktop switch with one Gigabit Ethernet port and four SFP+ 10Gbps ports

small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups

• There are four 100 Gigabit QSFP28 ports
• each port is connected to four 25 Gigabit lines, allowing you to connect 16 x 25 Gigabit devices
• Ethernet port for management purposes

MikroTik's Cloud Router Switch 106-1C-5S is a desktop size, smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with an L5 license and supports 11-30V power. Power supply is included

MikroTik's Cloud Router Switch 106-1C-5S is a desktop size, smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with an L5 license and supports 11-30V power. Power supply is included

• 8x Gigabit Smart Switch
• 1x SFP cage
• LCD
• 802.11b/g/n Dual Chain wireless
• 600MHz CPU
• 128MB RAM
• Metal desktop case
• RouterOS L5
• supports 10-57V
• 802.3af/at compliant

• 8x Gigabit Ethernet Smart Switch
• 4x SFP cages
• 400MHz CPU
• 128MB RAM
• desktop case
• RouterOS L5

• 4x SFP cages
• 400MHz CPU
• 128MB RAM
• desktop case
• RouterOS L5

This switch is an indoor variation of the prominent netFiber 9 switch – used by many small and medium ISPs for reliable 10 Gigabit fibre connections stretching over a 100 meters

• five 1G SFP ports, four 10G SFP+ ports, and an additional Gigabit Ethernet port
• modern ARM v7 CPU, 256 MB of RAM, and better cooling

• Switch of the future: the first MikroTik product with 10G RJ45 Ethernet ports and SFP+

• 1 x Gigabit LAN
• 16 x SFP+ cages
• Dual Core 800MHz CPU
• 1GB RAM
• 1U rackmount passive cooling case
• Dual Power Supplies

• An outdoor 18 port switch with 16 Gigabit PoE-out ports and 2 SFP+. Power all your access points anywhere!

• 24 Gigabit port switch with 2 x SFP+ cages in 1U rackmount case
• Dual boot (RouterOS or SwitchOS)

• Our fastest switch for the most demanding setups

• 24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case
• Dual Boot and PoE output
• 500W

• Smart Switch
• 20 x SFP cages
• 4 x SFP+ cages
• 4 x Combo ports (Gigabit Ethernet or SFP)
• 800MHz CPU
• 512MB RAM
• 1U rackmount case
• Dual Power Supplies
• RouterOS L5 or SwitchOS (Dual Boot)

• Best price and best performance on the market – this 48 port switch
• will rock any setup
• including 40 Gbps devices!

• The 48 port champion you’ve been waiting for - now with PoE-out!

• SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case

small size combined with the low power consumption (25W without attachments!) is perfect to start expanding 100 Gigabit networking in everyday setups

• more RAM, and four 10-Gigabit SFP+ ports
• Fast and reliable connectivity on a budget
• 2-pin terminal and a standard DC jack, so you have 3 different power options to choose from
• FiberBox Plus supports a wide input voltage range of 24-57V
• maximum power consumption (without attachments) is only 7W
• This rugged outdoor switch is perfect for connecting mast devices. Like the mANTBox 52 or the LHG XL 52

The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features:Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping

The MikroTik C53UiG+5HPaxD2HPaxD (hAP ax³) is a dual-band Wi-Fi 6 (AX1800) router and access point designed for efficient wireless networking in homes and offices

• features a quad-core IPQ-6010 ARM CPU with clock speeds ranging from 864 to 1800 MHz
• 1 GB of RAM
• 128 MB of NAND flash memory
• operating on RouterOS v7 (License 6)
• device provides dual-chain 2.4 GHz connectivity with speeds up to 574 Mbps (3.3 dBi antenna gain) and dual-chain 5 GHz connectivity with speeds up to 1200 Mbps (5.5 dBi antenna gain)

features a powerful dual-core ARM CPU. It offers significant improvement when it comes to routing and filtering, complex firewall rules, IPsec hardware encryption, and various advanced RouterOS features

• combination of a modern ARM CPU and a full-sized USB port is perfect for running custom container projects
• up to 4 times faster than RB2011 in most cases and setups, from simple fast path routing to complex bridge filters
• Gigabit Ethernet ports
• speedy Marvell Peridot Switchchip which offers an impressive 2.5 Gigabit full duplex connection to the CPU to all the ports except Ether1
• countless configurations with no bottlenecks

offers significant improvement when it comes to routing and filtering, complex firewall rules, IPsec hardware encryption, and various advanced RouterOS features

• powerful dual-core ARM CPU
• ARM CPU architecture provides significant advantages over older MIPS-based devices. Like using all the latest Linux Kernel features
• you can Block all unwanted ads with PiHole hosted on your L009
• Host your web blog or a simple website on your router – without any additional hardware

The mANTBox is based on MikroTiks mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.

features a modern dual-core ARM CPU

• Gigabit Ethernet and 2.5 Gigabit SFP for fiber connectivity
• USB port
• free miniPCIe slot that allows further customization

switch is a part of our GPEN concept - aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet

• easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments
• netPower 15FR has 15 reverse PoE ports
• The power supply is NOT included with the product- must be purchased separately

The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas

• The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro
• it is possible to perfectly set antenna alignment using integrated graduated scale. Compatible with any LHG product except the XL

Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.

The MikroTik 100 Gigabit QSFP Module enhances your networking capabilities with reliable connectivity over distances of up to 10 kilometers, compatible with CCR2216, CRS504, and CRS518 setups.

This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps

• module has built-in digital diagnostic functions, including optical power monitoring
• designed to meet the harshest conditions, including temperature, humidity, and EMI interference

• Powerful 1U rackmount router with 13x Gigabit Ethernet ports
• 60GB M.2 drive for Dude database

• Powerful 1U rackmount router with 13x Gigabit Ethernet ports

• 5x Gigabit Ethernet Smart Switch
• SFP cage
• plastic case
• SwOS

• 1U rackmount
• 10xGigabit Ethernet
• SFP
• USB 3.0
• LCD
• PoE out on port 10
• 2x1.4GHz CPU
• 1GB RAM
• RouterOS L5

• Powerful 10xGigabit port router with a Quad-core 1.4Ghz CPU
• 1GB RAM
• SFP+ 10Gbps cage and desktop case with rack ears

The board features 9 wired ports

• full-sized USB 3.0
• Seven of the ports are Gigabit Ethernet, another one is 2.5 Gigabit Ethernet, and the last one is a 10G SFP+ cage
• ports are connected to a powerful Marvell Amethyst family switch-chip with a 10 Gbps full-duplex line leading to the Marvell Armada Quad-core ARMv8 1.4 GHz CPU
• Boards come with 1GB of DDR4 RAM and 1GB NAND storage
• With a simple set of mounting accessories, you can mount FOUR of these routers in a single 1U rackmount space

MikroTik RB750Gr3, hEX 5GB/Eth, 1POE In, 256Mb RAM, 880MHz - RB750GR3


• 5x Gigabit Ethernet
• Dual Core 880MHz CPU
• 256MB RAM
• USB
• microSD
• RouterOS L4

MikroTik RB750UPr2, hEX PoE lite, 5Eth, 4POE Out, 1POE In - RB750UPR2


• 5xEthernet with PoE output for four ports
• USB
• 650MHz CPU
• 64MB RAM
• RouterOS L4

MikroTik RB760iGS, hEX S Dual Core 880MHz MHz CPU, 256MB - RB760IGS


• 5x Gigabit Ethernet
• SFP
• Dual Core 880MHz CPU
• 256MB RAM
• USB
• microSD
• RouterOS L4
• IPsec hardware encryption support and The Dude server package