Fibre

Four-port GPON optical line terminal (OLT) designed to manage fiber internet service for up to 512 clients (128 per port)

• Five-port desktop switch with one Gigabit Ethernet port and four SFP+ 10Gbps ports

• 1 x Gigabit LAN
• 16 x SFP+ cages
• Dual Core 800MHz CPU
• 1GB RAM
• 1U rackmount passive cooling case
• Dual Power Supplies

• Our fastest switch for the most demanding setups

• Smart Switch
• 20 x SFP cages
• 4 x SFP+ cages
• 4 x Combo ports (Gigabit Ethernet or SFP)
• 800MHz CPU
• 512MB RAM
• 1U rackmount case
• Dual Power Supplies
• RouterOS L5 or SwitchOS (Dual Boot)

The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas

• The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro
• it is possible to perfectly set antenna alignment using integrated graduated scale. Compatible with any LHG product except the XL

Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.

The MikroTik 100 Gigabit QSFP Module enhances your networking capabilities with reliable connectivity over distances of up to 10 kilometers, compatible with CCR2216, CRS504, and CRS518 setups.

This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps

• module has built-in digital diagnostic functions, including optical power monitoring
• designed to meet the harshest conditions, including temperature, humidity, and EMI interference

MikroTik RBFTC11, Fiber to Copper Converter, 1SFP - RBFTCC11


• Fiber to Copper converter
• Outdoor case
• 12-57V PoE with 802.3af/at support

• SFP+ (10Gbit)
• 300m
• Multi Mode

• 6-speed RJ-45 module for up to 10 Gbps

MikroTik S-31DLC20D, SingleMode SFP module, 1SFP, LC, 1.25G, 1310nm, 20km - S-31DLC20D


• SFP (1.25G) module
• 20KM
• Single Mode

• Two SFP (1.25G) module kit
• 20Km
• single mode

• SFP 1.25G module for 80km links with Dual LC-connector

S-35/53LC20D is a pair of SFP transceivers

• the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector
• The S-53LC20D is a 1.25G Single Mode optical SFP transceiver with an LC connector,T1550nm/R1310nm, which works for connections up to 20km and supports DDM

This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks.

This unit is a direct upgrade of our previous 10G SFP+ 10 km module: more functionality for the same price. We have added 25G SFP28 support – so you can use one module in all your setups. Perfect for the CCR2004-1G-12S+2XS connectivity router and any other multiport devices.

Direct attach cable that supports not only SFP 1G and SFP+ 10G, but also the 25G SFP28 standard

• highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of our new CCR2004-1G-12S+2XS) for very short distances, within racks and across adjacent racks
• low power and low latency interconnect solution for 25-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications
• Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)

Supported data rates: 10 / 1 Gbps

• Compatible with SFP+ and SFP interfaces
• Cable length: 0.5 to 3 m

• Each module supports a data rate of 1 Gbps and is used for Gigabit Ethernet connections between UniFi devices
• Form Factor: SFP Connector
• Type: (1) LC Duplex per module Supported
• Media: Multi-Mode Fiber (MMF) OM1/OM2/OM3/OM4/OM5
• Wavelength: 850 nm
• Data Rate: 1 Gbps Maximum
• Reach: Up to 550 m (OM2), 275 m (OM1) Operating
• Temperature: 0 to 70° C (32 to 158° F)
• Quantity: 2 modules per pack

Supports multi-mode fiber connections up to 300 m

• Duplex LC UPC connector
• Compatible with SFP+ and SFP interfaces
• Max data rate: 10 Gbps

includes two (2) UniFi 10G Multi-Mode SFP+ (Small Form-factor Pluggable Plus) modules designed for short-reach multi-mode fiber (MMF) connections

• Each module supports a data rate of 1 Gbps and is used for Gigabit Ethernet connections between UniFi devices
• Each module supports a data rate of 10 Gbps and is commonly used for high-speed links between UniFi switches and other networking devices
• Form Factor: SFP+
• Connector Type: (1) LC Duplex per module Supported
• Media: Multi-Mode Fiber (MMF) OM3/OM4/OM5
• Wavelength: 850 nm
• Data Rate: 10 Gbps Maximum
• Reach: Up to 300 m (OM4), 100 m (OM3), 30 m (OM2)
• Operating Temperature: 0 to 70° C (32 to 158° F)

SFP+ transceiver that supports 10G connections up to 10 km using single-mode fiber with a duplex LC UPC connector

• Max data rate: 10 Gbps
• Compatible with SFP+ and SFP interfaces
• Duplex LC UPC connector
• Supports single-mode fiber connections up to 10 km

SFP transceiver that supports 1G connections up to 3 km using single-mode fiber with a simplex LC UPC connector

• Max data rate: 1 Gbps
• Compatible with SFP interfaces
• Simplex LC UPC connector
• Supports single-mode fiber connections up to 3 km

SFP+ transceiver that supports 10G connections up to 10 km using single-mode fiber with a duplex LC UPC connector

• Max data rate: 10 Gbps
• Compatible with SFP+ and SFP interfaces
• Duplex LC UPC connectorr
• Supports single-mode fiber connections up to 10 km

The Fiber OLT’s GPON SFP ports are designed for use with the UF-GP-B+ and UF-GP-C+ SFP modules.

• Compatibility: UF-OLT, UF-OLT-4, UISP-FIBER-OLT-XGS

The Fiber OLT’s GPON SFP ports are designed for use with the UF-GP-B+ and UF-GP-C+ SFP modules.

• Compatibility: UF-OLT, UF-OLT-4, UISP-FIBER-OLT-XGS

GPON customer-premises equipment (CPE) that pairs high performance with extremely low power consumption.

GPON customer-premises equipment (CPE) with an LED display for convenient device monitoring.

Eight-port GPON optical line terminal (OLT) designed to manage fiber internet service for up to 1,024 clients (128 per port)

GPON customer-premises equipment (CPE) with a built-in WiFi router.

The UFiber Instant is a high‑performance GPON CPE in the form factor of an SFP module. It features an SGMII Ethernet LAN port and is powered by SFP

GPON customer-premises equipment (CPE) with WiFi6 support.

The UF-RJ45-1G allows connecting RJ45 Copper Ethernet connections to existing SFP ports.